Block Patterns:McCunn

    From Seamly
    This page contains changes which are not marked for translation.


    Block Patterns : McCunn


    Measurements[edit | edit source]

    Like all patternmaking systems, the McCunn system is defined by the measurements that Don McCunn chose to use. The McCunn system uses inches, but if your measurement file has centimeters and it contains all the measurements used by the McCunn system then SeamlyMe will automatically convert it into inches.

    Measurements File[edit | edit source]

    Here is a sample measurement file for the McCunn system -- McCunn_sample.vit.

    Measurements Table[edit | edit source]

    This table lists the measurements used in the McCunn system and maps them to SeamlyMe measurement names:

    McCunn Measurement SeamlyMe Measurement SeamlyMe Image
    Arm length arm_shoulder_tip_to_wrist_bent L01
    Shoulder to Elbow length arm_shoulder_tip_to_elbow_bent L02
    Sleevecap length arm_shoulder_tip_to_armfold_line L16
    Biceps arm_upper_circ L11
    Palm hand_palm_circ D04

    Block Patterns[edit | edit source]

    The McCunn block patterns were developed to work with woven fabrics.

    Block Patterns Table[edit | edit source]

    Here are the block patterns from the McCunn patternmaking system:

    Pattern Type Pattern File (.val) Tutorial page
    Sleeve McCunn_basic_sleeve_details.val Block_Patterns:McCunn:Sleeve